FREE GROUND SHIPPING ON ORDERS OVER $200
***LOWER 48 STATES ONLY***
GRILLE GUARD/HOOP & WINCH MOUNT PACKAGES View larger

GRILLE GUARD/HOOP & WINCH MOUNT PACKAGES

New

$619.95


PRODUCT OVERVIEW:


Whether for off-roading or suburban excursions this bolt on package will make your 10A/X or Hard Rock Rubicon stand out from the crowd. This package consists of a heavy gauge steel tubular Grille Guard/Hoop, Auxiliary Light Brackets, universal Winch Mount and Hook Anchor.

The Maximus-3 inboard winch mount/plate will get you out of sticky situations. The plate is made of heavy gauge steel and is cleverly engineered to provide a structurally strong and stiff mount for your winch. 
The system is chassis mounted and is universal to give you the freedom to install a winch of your choice whether for centered or off center set-up. Maximus-3 Winch Mount/Plate packages offer optional accessories depending on your winch set-up.

Vacuum Pump Relocation Bracket: The Vacuum Pump Bracket is an optional accessory which is usually required when installing a WARN Zeon or 9.5cti/ti winches or small body winches in the off center location.

Fairlead Centering Plate: The Centering Plate serves as a relocation plate for your Fairlead to be able install your winch in the centered position in the bumper. Optionally you can use a Hook Anchor instead.

Off Set Fairlead Plate: The Off Set Fairlead Plate is similar to the Centering Plate but for off set winch set-up. The plate lines up with factory fairlead holes/slot and provides more strength and finish to the bumper face. 

Maximus-3 Hook Anchor: The Hook Anchor serves the same functions as the Centering Plate but with the additional function as a secure anchor point/loop for your winch hook.

Filler Trim Plates: The Filler Trim Plates will trim the area around your winch and fills the gap between the bumper and the grille to cover the chassis frame for a more finished install. 
Two styles available: Zeon Trim Plates for WARN Zeon winch or Standard Trim Plates for small body winches.

D-Ring Loops: The D-Ring Loops will give you secure points to attach a pair of recovery D-Rings. The loops are made from ½” thick steel and mount to the bottom side of the winch plate.

LED Light Bar Brackets (PN: 0400-024LEDLB): The LED Light Bar Brackets provide a no-drill solution to mount an LED bar in front of the Hoop. Our brackets fit 12”or 20”LED bars with horizontal bolt style.

The Grille Guard/Hoop is made from 2.5”OD heavy gauge steel tubing. This OE quality product does not only look good on your Jeep but it will actually protect your grille and radiator from brush, rocks and deer strikes. 
The system reinforces the bumper with structural brace brackets that tie to the chassis frame to provide structural strength without compromising styling.
The Hoops are available in three styles: Classic Hoop, X Hoops and LP Hoop.


“X” Hoop (PN; 0400-007XHO): This single bend tube style option gives the front of your Jeep cleaner styling lines that complement the general aesthetics of your Jeep without compromising function

Classic Hoop (PN: 0400-007CHO): With classic double bend tube style this option will give your Rubicon the front protection and the classy styling to go with

LP Hoop (PN: 0400-007LPHO): With its low and mean stance this hoop style will provide some front protection to the front of your Jeep with an attitude and style.


KEY FEATURES & SPECS:


Designed specifically to fit 10A/X and Hard Rock Edition Rubicon bumper.

Made of heavy gauge steel plate & bent tube – press brake, tube bending & welding

Winch plate Mounts directly to the vehicle’s chassis frame

Utilizes existing mounting points to install

Mounting hardware included

Durable black textured powder coat paint

Added weight: 16 Lb. (approx.)

Made in The United States

Fits most winches with standard bolt pattern. 

Note: We do not recommend installing WARN Power Plant winch due to its oversized body dimensions to fit in the 10A/X

Product Options
SELECT HOOP/BAR STYLE:    * Required
 
X HOOP PACKAGE
 
 
CLASSIC HOOP PACKAGE
 
 
LP HOOP PACKAGE
 
SELECT AN OPTION    * Required
 
0400-002HLP-VHFX (HOOP, LIGHT BRACKETS, WINCH MOUNT, BLACK-HOOK ANCHOR, VAC PUMP BRACKET, FILLER TRIM PLATES)
[Add $94.00]
 
0400-003HLP-CVX ( HOOP, LIGHT BRACKETS, WINCH MOUNT, CENTEREING PLATE, VAC PUMP BRACKET)
 
 
0400-005HLP-TVX (HOOP, LIGHT BRACKETS, WINCH MOUNT, OFF-SET PLATE, VAC PUMP BRACKET, FOR OFF-SET WINCH, 9.5CTI)
 
 
0400-004HLP-COX (HOOP, LIGHT BRACKETS, WINCH MOUNT, CENTEREING PLATE ONLY, CENTERED SET-UP SMALL BODY WINCHES)
[Subtract $29.00]
 
0400-006HLP-VOX (HOOP, LIGHT BRACKETS, WINCH MOUNT, VAC PUMP BRACKET ONLY, OFF-SET 9.5 CTI/TI WINCH)
[Subtract $40.00]
 
0400-002HLP-VHFX (HOOP, LIGHT BRACKETS, WINCH MOUNT, RED-HOOK ANCHOR, VAC PUMP BRACKET, FILLER TRIM PLATES)
[Add $94.00]

5 other products in the same category: