Maximus-3 10A/X Grille and Radiator Guard is made from 2.5”OD
heavy gauge steel tubing. This OE quality product does not only look
good on your Jeep but it will actually protect your grille and radiator
from brush, rocks and deer strikes.
The system reinforces the bumper with structural brace brackets that tie
to the chassis frame to provide structural strength without compromising
Available in three styles: Classic Hoop, X Hoops and LP Hoop.
STYLE - QUALITY - FUNCTION
Whether for off-roading or suburban excursions this bolt on package will
make your 10A/X or Hard Rock Rubicon stand out from the crowd. This
package consists of a heavy gauge steel tubular grille/radiator guard,
Auxiliary Driving Lights, Optional universal Winch Mount package,
Hook Anchor and D-Ring Loops.
With classic double bend tube style this option will give your Rubicon
the front protection and the classy styling to go with.
This single bend tube style option gives the front of your Jeep cleaner
styling lines that complement the general aesthetics of your Jeep without
With its low and mean stance this hoop style will provide some front
protection to the front of your Jeep with an attitude and style.
WINCH MOUNT SETUP
Our inboard chassis mounted winch mount will get you out of sticky
situations. The plate is made of heavy gauge steel and is cleverly
engineered to provide a structurally stiff mount for your winch.
The system is universal to give you the freedom to install a winch of your
choice whether for centered or offset set-up.
The package comes with optional accessories such as Vacuum Pump
Relocation Bracket, Front Centering Plate, Front Trim Plate, MX Hook
Anchor, Filler Trim Plates and D-Ring Loops.
JK HEAVY DUTY TIRE CARRIER
Maximus-3 Tire Carrier is the ultimate heavy duty gadget to carry a big
spare tire and/or your trail or off road gear. Our Tire Carrier system
centers the tire over the recess in the stock rear bumper and comes with
an adjustable tire mount and CHM (Center High Mount) 3rd Brake Light.
The system is a well optimized package to carry expedition and trail
necessities. The base package comes with adjustable tire mount,
accessories mast and CHM 3rd brake light.
MAXIMUS-3 JK MODULAR TIRE CARRIER
- Hi-Lift Jack Mount
- Jack Shovel Mount/Clamps
- Side Shovel Mount
- Side Rotopax Mount
- High Double Pax Mount
- Side NATO/USGI Jerry Can Holder
- Center High Mount Work Light Bracket
- Backup Camera/ Bracket
- Side LED Backup Light Bracket
- Side LED Backup Light
- Center Accessories Mast/Stem
- Aerodynamically designed to minimize wind drag and noise on the road
- Heavy duty internal load bearing brackets transfer cargo weight to the JK roll bar for maximum
- Bearing Brackets attach directly to the JK roll bar
- The hardtop can be removed without having to dismantle the roof rack
- The steel mount assembly is well sealed with rubber gaskets to prevent leakage
- Optional Side ladder provides foot stepping and easy access to your cargo load
- The platform is available is two sizes: 60”x 54” and 76”x 54”
- The platform is truly low profile adding only 2” to overall vehicle height
- The platform still allows removal of OE Freedom Top panels
- The platform is made from strong and durable materials
- The platform is versatile and is compatible with many existing accessories
- The platform features T-slot channels for tie down points
- Optional full rail, back and side rails are available to be added to the platform
NB: Maximus-3 Pioneer Roof Rack system does not fit 2-door JK Wrangler.
EASY AND SECURE CARGO LOADING
Loading and unloading your cargo is easy. Simply slide your gear onto
the Platform and tie them down to the bars. Optional side ladder
provides easy access to the platform to arrange your cargo or climb onto
The system is designed to carry various existing accessories including
luggage bags, jerry can holders, spare wheel holders, shovels and more.
The platform can also be fitted with optional rails around the platform:
full rail, back and side rails.
Filler Trim Plates
The Filler Trim Plates will trim the area around your winch and fills the
gap between the bumper and the grille to cover the chassis frame for a
more finished install. Two styles are available: Zeon Trim Plates and
Standard Trim Plates for small body winches.
Vacuum Pump Relocation Bracket is an optional part which is usually
required for all off-set winch set-ups with WARN 9.5cti and compact
winches e.g., WARN VR, Smittybilt X20/XRC, Super Winch, etc. The
Vacuum Pump Relocation Bracket is also required when installing a
WARN Zeon winch.
Centering Plate serves as a relocation plate for your Fairlead to be able
install your winch in the centered position in the bumper. The MX Hook
Anchor serves the same functions as the Centering Plate but with the
additional function as a neat and secure anchor point and loop for your
Auxiliary Light Brackets
The Auxiliary Light Brackets are necessary for mounting a pair of
auxiliary off-road lights you may need for your off-road excursions. The
brackets are suitable to fit up to 9”round lights with single stud/bolt
We also offer LED Light Brackets to mount LED bars in front of the
Hoop. Our brackets fit 12”or 20”LED bars.
Besides the Hoops we also offer the “Stinger” Bar. This is the result of
carefully balanced styling and function. Unlike the traditional giant
Stinger bars seen on aftermarket Jeep bumpers, our design is rather
subtle and yet looks rugged to complement the looks of the 10A/X and
Hard Rock Rubicon.
Like all of our grille guards the “Stinger” Bar mount brackets reinforce
the bumper and tie to the chassis frame to provide structural strength and
ensure that it will protect the front of your Jeep against rocks and
- Designed specifically to fits JK, Moab/MW3 & 10A/X models
- Versatile design to allow for different loading requirements and configurations
- Made of a unique one-piece design heavy gauge steel tubular construction -2”OD tube, welding
- Articulating hinged design for synchronized opening and closing of the tailgate
- Integrated pre-tension mechanism for rattle/vibration-free running.
- Wide hinge bearing points for better stability and load distribution
- Effortless door opening due to low friction self-lubricating bronze bearings
- Does not require getting ride of the Rear Tow Hook Loop
- Up to 37”tire size load capacity
- Low and centered tire mount for low center of weight.
- Adjustable tire mount for different tire sizes.
- Minimalistic robust design with built-in quality control features
- 100% bolt-on installation with no drilling or cutting required.
- Durable fine textured black powder coat finish
- Hinge design is completely independent of the factory door hinge.
- Spare Tire rubber makes contact with the tube at multiple points for more stability and even
- Various optional accessories and mounts available
SLEEK AND TRULY LOW PROFILE
The Roof Rack/platform is a sleek, stylish and truly low profile design
for better aerodynamic and wind noise performance.
The Rack /Platform is offered in two sizes:
JK ROOF RACK/PLATFORM
Maximus-3 Rhino Rack Roof Platform is the ultimate expedition
accessory for your expedition and overland trips to increase cargo
carrying capacity. Our Roof Rack system utilizes Rhino Rack Pioneer
Platform. The design features heavy duty internal load bearing brackets
to transfer cargo weight to the JK roll bar. The steel mount assembly is
well sealed with rubber gaskets to prevent leakage.
Maximus-3 Hook Anchor
The MX Hook Anchor serves the same functions as the Centering Plate
but with the additional function as an anchor point and loop for your
Front Peripheral LED Light Brackets
Provide mounting points to add a pair of LED lights on your 10A/X
Rubicon outer bumper end cabs.
Front Trail Cam Mount Bracket
Maximus-3 Front Trail Cam Mount offers a quick and easy solution to
mount a trail camera lens to your front bumper. The bracket features
slotted mounts to accept different camera lenses and is designed to fit
10A/X Rubicon and AEV/Moab/MW3 bumpers.
The D-Ring Loops will give you secure points to attach a pair of
recovery D-Rings. The loops are made from ½” thick steel and mount to
the bottom side of the winch plate.
JW Speaker Fog Light Brackets
Our 10A/X JW Speaker Fog Light Brackets will allow you to replace
your factory fog lights with the popular 6145 JW Speaker aftermarket
diode fog lights. They are easy to install and the fit is seamlessly perfect.