FREE GROUND SHIPPING ON ORDERS OVER $200
***LOWER 48 STATES ONLY***
Home > OFF-SET WINCH MOUNT SET-UP (OFF SET TRIM PLATE, VACUUM PUMP RELOCATION BRACKET )
MAXIMUS-3 INBOARD WINCH MOUNT/PLATE View larger

OFF-SET WINCH MOUNT SET-UP (OFF SET TRIM PLATE, VACUUM PUMP RELOCATION BRACKET )

New

OFF CENTER WINCH SET-UP WITH OFF SET TRIM PLATE, VACUUM PUMP RELOCATION BRACKET - FOR USE WITH WARN 9.5 CTI/TI WINCHES ONLY.

Note: NOT SUITABLE FOR USE WITH WARN ZEON WINCHES AND All SMALL BODY WINCHES LIKE SMITTYBILT X20/XRC/X, WARN VR, ENGO WINCH, SUPER WINCH AND SIMILAR WINCHES WITH SYNTHETIC OR STEEL LINE/CABLE.

 Note: In order to relocate your vacuum pump, you will have to cut the factory relocation bracket.


California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov

-

$255.99

Add to my wishlist


PRODUCT OVERVIEW:

Our inboard chassis mounted winch plate/mount will get you out of sticky situations. The plate is made of heavy gauge steel and is cleverly engineered to provide a structurally strong and stiff mount for your winch.
The system is universal to give you the freedom to install a winch of your choice whether for centered or offset set-up. Maximus-3 Winch Mount/Plate packages offer optional accessories depending on your winch set-up.

OPTIONAL ACCESSORIES:

Vacuum Pump Relocation Bracket: The Vacuum Pump Bracket is an optional accessory which is usually required when installing a WARN Zeon or 9.5cti/ti winches or small body winches in the off center location.

Fairlead Centering Plate: The Centering Plate serves as a relocation plate for your Fairlead to be able install your winch in the centered position in the bumper. Optionally you can use a Hook Anchor instead.

Off Set Fairlead Plate: The Off Set Fairlead Plate is similar to the Centering Plate but for off set winch set-up. The plate lines up with factory fairlead holes/slot and provides more strength and finish to the bumper face.

Maximus-3 Hook Anchor: The Hook Anchor serves the same functions as the Centering Plate but with the additional function as a secure anchor point/loop for your winch hook.

Filler Trim Plates: The Filler Trim Plates will trim the area around your winch and fills the gap between the bumper and the grille to cover the chassis frame for a more finished install.
Two styles available: Zeon Trim Plates for WARN Zeon winch or Standard Trim Plates for small body winches.

D-Ring Loops: The D-Ring Loops will give you secure points to attach a pair of recovery D-Rings. The loops are made from ½” thick steel and mount to the bottom side of the winch plate

KEY FEATURES & SPECS:

  • Designed specifically to fit 10A/X and Hard Rock Edition Rubicon bumper.
  • Made of a one piece heavy gauge bent steel plate – press brake & welding
  • Durable black textured powder coat paint
  • Mounts directly to the vehicle’s chassis frame
  • Added weight: 16 Lb. (approx.)
  • Made in The United States
  • Fits most winches with standard bolt pattern.

Note: We do not recommend installing WARN Power Plant winch due to its oversized body dimensions to fit in the 10A/X and Hard Rock bumper.
Product Options
OPTIONAL ACCESSORIES
 
DEFAULT SELECTION
 
0400-029OSWHA-B (BLACK OFF-SET WINCH HOOK ANCHOR UPGRADE – FOR SYNTHETIC LINE/ROPE ONLY)
[Add $20.00]
 
0400-029OSWHA-R (RED OFF-SET WINCH HOOK ANCHOR UPGRADE – FOR SYNTHETIC LINE/ROPE ONLY)
[Add $20.00]
 
0400-016MGF-R (MAX GLIDE FAIRLEAD - RED POWDER COAT FINISH)
[Add $54.99]
 
0400-016MGF-B (MAX GLIDE FAIRLEAD - BLACK POWDER COAT FINISH)
[Add $54.99]
 
0400-015FTP-S (STANDARD FILLER TRIM PLATES - FITS SMALL BODY WINCHES. NOR SUITABLE FOR WARN 9.5 CTI WINCH )
[Add $59.00]

30 other products in the same category: