FREE GROUND SHIPPING ON ORDERS OVER $200
***LOWER 48 STATES ONLY***

ZEON WINCH MOUNT SET-UP (CENTERED SETUP WITH CENTERING PLATE & VAC PUMP BRACKET)

New

CENTERED WINCH SET-UP WITH CENTERING PLATE AND VACUUM PUMP RELOCATION BRACKET – FOR WIDE BODY WINCHES EG. ZEON/PLATNUM WITH SYNTHETIC OR STEEL LINE/CABLE.. NOT RECOMMENDED FOR WARN 9.5 CTI /TI WINCH.

Note: In order to relocate your vacuum pump you will have to cut the factory relocation bracket.
-

$255.99


PRODUCT OVERVIEW:

Our inboard chassis mounted winch plate/mount will get you out of sticky situations. The plate is made of heavy gauge steel and is cleverly engineered to provide a structurally strong and stiff mount for your winch.

The system is universal to give you the freedom to install a winch of your choice whether for centered or offset set-up. Maximus-3 Winch Mount/Plate packages offer optional accessories depending on your winch set-up.


OPTIONAL ACCESSORIES:

Vacuum Pump Relocation Bracket: The Vacuum Pump Bracket is an optional accessory which is usually required when installing a WARN Zeon or 9.5cti/ti winches or small body winches in the off center location.

Fairlead Centering Plate: The Centering Plate serves as a relocation plate for your Fairlead to be able install your winch in the centered position in the bumper. Optionally you can use a Hook Anchor instead.

Off Set Fairlead Plate: The Off Set Fairlead Plate is similar to the Centering Plate but for off set winch set-up. The plate lines up with factory fairlead holes/slot and provides more strength and finish to the bumper face.

Maximus-3 Hook Anchor: The Hook Anchor serves the same functions as the Centering Plate but with the additional function as a secure anchor point/loop for your winch hook.

Filler Trim Plates: The Filler Trim Plates will trim the area around your winch and fills the gap between the bumper and the grille to cover the chassis frame for a more finished install.

Two styles available: Zeon Trim Plates for WARN Zeon winch or Standard Trim Plates for small body winches.

D-Ring Loops: The D-Ring Loops will give you secure points to attach a pair of recovery D-Rings. The loops are made from ½” thick steel and mount to the bottom side of the winch plate


KEY FEATURES & SPECS:

üDesigned specifically to fit 10A/X and Hard Rock Edition Rubicon bumper.
üMade of a one piece heavy gauge bent steel plate – press brake & welding
üDurable black textured powder coat paint
üMounts directly to the vehicle’s chassis frame
üAdded weight: 16 Lb. (approx.)
üMade in The United States
üFits most winches with standard bolt pattern.

Note: We do not recommend installing WARN Power Plant winch due to its oversized body dimensions to fit in the 10A/X and Hard Rock bumper.

Product Options
OPTIONAL ACCESSORIES
 
DEFAULT SELECTION
 
0400-024WHA-B (BLACK WINCH HOOK ANCHOR UPGRADE – FOR SYNTHETIC LINE/ROPE ONLY)
[Add $25.00]
 
0400-024WHA-R (RED WINCH HOOK ANCHOR UPGRADE – FOR SYNTHETIC LINE/ROPE ONLY)
[Add $25.00]
 
0400-016MGF-R (MAX GLIDE FAIRLEAD - RED POWDER COAT FINISH)
[Add $69.00]
 
0400-016MGF-B (MAX GLIDE FAIRLEAD - BLACK POWDER COAT FINISH)
[Add $69.00]
 
0400-015FTP-Z (ZEON FILLER TRIM PLATES - FITS WARN ZEON WINCHES ONLY, EG. WARN ZEON/PLATNUM 10)
[Add $68.99]

30 other products in the same category: